nordic nrf52832 ble module ipex slave, master, master-slave, beacon protocol module smart toy
rf-bm-nd04i is an rf module based on nordic ble soc nrf52832qfaa with arm®cortex®-m4 32-bit processor. it integrates a 32.768 khz and a 32 mhz crystal, an lc filter, an antenna matching and an ipex antenna interface. it features low power consumption, small size, robust connection distance, and rigid reliability. it supports ble stack v5.0 and can be preprogrammed with a serial interface communication protocol for simple programming. 1.27-mm pitch stamp stick package for easy assembling and cost-effective pcb design. rf-bm-nd04i is pin-to-pin compatible with rf-bm-nd04ci.
at command:
aquire / set name
aquire / set firmware version
aquire / set device mac address
aquire / set whether echo
aquire / set whether display device state
aquire / set broadcast parameters of slave role
aquire / set connection interval
aquire / set related parameters of ble service
disconnect current connected device
aquire / set related parameters of beacon
aquire / set device role
aquire / set device power
aquire / set device sleep
aquire / set baud rate
aquire / set user authentication
reset device
restory
slave mode
uuid: 128-bit
transparent transmission
beacon mode
major 0x0102
minor x0304
rssi -50
uuidd 0x01, 0x02, 0x03, 0x04,0x05, 0x06, 0x07, 0x08,0x09, 0x0a, 0x0b,
0x0c,0x0d, 0x0e, 0x0f, 0x10
company id 0x0059(nordic)
parameters of rf-bm-nd04i
chipset | nrf52832qfaa |
supply power voltage | 1.7 v ~ 3.6 v, recommended to 3.3 v |
frequency | 2402 mhz ~ 2480 mhz |
transmit power | -20.0 dbm ~ 4.0 dbm |
receiving sensitivity | -96 dbm |
gpio | 29 |
crystal | 32 mhz, 32.768 khz |
ram | 64 kb |
flash | 512 kb |
package | smt packaging |
frequency error | ±20 khz |
dimension | 24.8 mm x 15.0 mm x (2.3 ± 0.1) mm |
type of antenna | ipex connector |
operating temperature | -20 ℃ ~ 70 ℃ |
storage temperature | -40 ℃ ~ 85 ℃ |
pin functions of rf-bm-nd04i
pin | name | chip pin | pin type | description |
1 | gnd | gnd | gnd | gnd |
2 | ant | ant | ant | antenna interface |
3 | gnd | gnd | gnd | gnd |
4 | gnd | gnd | gnd | gnd |
5 | vcc | vcc | power | power supply 1.7 v ~ 3.6 v, recommend 3.3 v |
6 | p21 | p0_21/reset | i/o | reset |
7 | p22 | p0_22 | i/o | |
8 | p23 | p0_23 | i/o | |
9 | p24 | p0_24 | i/o | |
10 | p25 | p0_25 | i/o | |
11 | p28 | p0_28/ain4 | i/o | |
12 | p29 | p0_29/ain5 | i/o | |
13 | p30 | p0_30/ain6 | i/o | |
14 | p26 | p0_26 | i/o | |
15 | p27 | p0_27 | i/o | |
16 | p02 | p0_2/ain0 | i/o | |
17 | p03 | p0_3/ain1 | i/o | |
18 | p04 | p0_4/ain2 | i/o | |
19 | p05 | p0_5/ain3 | i/o | |
20 | p06 | p0_6 | i/o | |
21 | p07 | p0_7 | i/o | |
22 | p08 | p0_8 | i/o | |
23 | p09 | p0_9 | i/o | |
24 | p10 | p0_10 | i/o | |
25 | p11 | p0_11 | i/o | |
26 | p12 | p0_12 | i/o | |
27 | p13 | p0_13 | i/o | |
28 | p14 | p0_14 | i/o | |
29 | p15 | p0_15 | i/o | |
30 | p16 | p0_16 | i/o | |
31 | swdio | jtag swd | i/o | serial wire debug clock input for debug and programming |
32 | swclk | jtag clk | i/o | serial wire debug i/o for debug and programming |
33 | p17 | p0_17 | i/o | |
34 | p18 | p0_18 | i/o | |
35 | p19 | p0_19 | i/o | |
36 | p20 | p0_20 | i/o | |