product description
fcc/bqb/ce/rohs rf-star rf-bm-s01 cc2540 bluetooth pcb antenna uart module
rf-bm-s01 is a bluetooth low energy (ble) module based on ti cc2540f256, an 8051 core ble system-on-chip (soc). this pcb module integrates a 32 mhz crystal, a 32.768 khz crystal, an lc balun, an rf matching filter, and a meander line pcb antenna. it is pre-programmed with the ble 4.0 stack and an application communication protocol over its full speed usb interface. it can be used to design a usb dongle to easily establish ble connection from a device to smart phones. very low-power sleep modes are available. short transition times between operating modes further enable low power consumption. rf-bm-s01 is pin-compatible with the rf-bm-s01a in smt package, if the usb is not used on the rf-bm-s01 and the i2c/extra i/o is not used on the rf-bm-s01a. compared to the rf-bm-s01, the rf-bm-s01a provides lower rf current consumption.oes not have the usb interface of the rf-bm-s01, and provides lower maximum output power in tx mode. the rf-bm-s01a also adds a hw i2c interface.
table 1. the pin functions of rf-bm-s01-1
pin | name | chip pin | pin type | description |
1 | gnd | - | gnd | gnd |
2 | vcc | - | vcc | power supply: 2 v ~ 3.6 v |
3 | p22 | p2.2 | i/o | debug_dc |
4 | p21 | p2.1 | i/o | debug_dd |
5 | p20 | p2.0 | i/o |
|
6 | p17 | p1.7 | i/o |
|
7 | p16 | p1.6 | i/o |
|
8 | usb_p | usb | i/o | usb_p |
9 | usb_n | usb- | i/o | usb_n |
10 | gnd | p1.5 | gnd | gnd |
11 | p15 | p1.4 | i/o |
|
12 | p14 | p1.3 | i/o |
|
13 | p13 | p1.2 | i/o |
|
14 | p12 | p1.1 | i/o |
|
15 | p11 | p1.0 | i/o |
|
16 | p10 | p0.7 | i/o |
|
17 | p07 | p0.6 | i/o |
|
18 | p06 | p0.5 | i/o |
|
19 | p05 | p0.4 | i/o |
|
20 | p04 | p0.3 | i/o |
|
21 | p03 | p0.2 | i/o |
|
22 | p02 | p0.1 | i/o |
|
23 | p01 | p0.0 | i/o |
|
24 | p00 | rst | i/o |
|
25 | reset | - | reset | active low |
26 | nc | - | nc |
|
27 | ant | p2.2 | ant | external antenna |
28 | nc | p2.1 | nc |
|
